Rapid Recess Kit for Center Point Drain

Description

The Bracket Kit for Point Drain is used with pre-manufactured or mortar shower pans with a center point drain. This kit will cover 25 square feet or less with the recommended shower pan sizes being 5′ x5′ or 4′ x 6′. The floor height within the shower area is recessed 11/16″ and is limited by the height of the floor joists. Includes metal brackets for lowering plywood floors for a curbless shower.

• Installed from above the joists without the use of a 2×4 frame or compromising the structural integrity of the joists (Rapid Recess doesn’t interfere with plumbing or other obstacles between the joists)
• Used with different, types, widths, and orientation of floor joists (joists parallel or perpendicular to shower entry)
• No framing ledger boards or cross-bracing needed
• Floor height within the lowered area is recessed by 11/16″
• Brackets are made of 16 gauge galvanized steel
• Kits available for point or linear drains and shower pans
• Complies fully with ICC standards and codes
• Manufactured in Colorado, USA

Kit Includes:

• M bracket – 47 3/8″ long main bracket fastened to the top of floor joists (x10)
• Z bracket – 5″ long side bracket used for wall to recess and main floor to recess transitions (x30)
• #10 1 5/8” wood to metal self-drilling screws with wings (2 packages of 80 pieces)
• #10 2 3/4” wood to metal self-drilling screws with wings (x40)
• #8 x 1 1/4” Flat-head Phillips screws (x60)