Schluter KK183 KERDI-SHOWER-KIT 72 in. x 72 in. Center Drain Tray Without Drain
The Schluter KERDI-SHOWER-KIT is an all inclusive package containing each of the integrated family of components required to create a maintenance free, watertight, shower assembly without a mortar bed.
The Schluter-KERDI-SHOWER-ST/-SC tray and curb are made of expanded polystyrene (EPS) foam with a high compressive strength (57 psi). They provide a convenient, lightweight, and stable substrate for the Schluter-KERDI waterproofing membrane and tile. After the tile is installed and grouted, the assembly will support all the loads typical of tiled showers. This can include glass doors or glass block walls.
- This kit contains a 72″ x 72″ shower pan.
- You can also cut this kit down to size. Ideally, the tray should be cut by equal amounts on all four sides to ensure a consistent height of the first course of wall tile. However, slight differences can typically be made up with thin-set mortar when setting the floor tile. The shower base can also be extended past the perimeter of the shower tray using dry pack mortar.