Roberts 7399 Universal Plus Resilient Flooring & Carpet Adhesive (1 gal.)

Roberts 7399 Universal Plus Resilient Flooring & Carpet Adhesive (1 gal.)

$21.53

Roberts 7399 Universal Plus Flooring Adhesive is an Ultimate-grade, high solids formulation with a tremendous bond and excellent moisture and plasticizer migration resistance. 7399 is approved for several flooring types, backings and substrates, making it a versatile solution to keep on hand. This adhesive may be applied as a permanent or as a true, pressure sensitive adhesive. The pressure sensitive application offers an extended open time, depending on the flooring type.

Roberts 7399 Universal Plus Resilient Flooring & Carpet Adhesive (1 gal.)

  • Ideal for LVT/LVP, WPC/SPC, VCT/VET; all solid vinyl-backed carpet, carpet tiles and sheet goods; recycled rubber and underlayment
  • Bonds with properly prepared concrete, flooring grade APA rated plywood, steel, marble, terrazzo, existing and well-bonded vinyl tile flooring (excluding self-stick), and radiant heated subfloors whose surface temperature does not exceed 85 degrees Fahrenheit
  • For environmentally-controlled indoor use only
  • Ultimate bond strength resists shearing and peeling
  • Moisture Control Adhesive that won’t break down or emulsify when water is introduced – up to 12 lbs. MVER and 99% RH
  • Up to 20 minutes open time and up to 40 minutes working time for permanent installations (wet-set method) on porous substrates only
  • Up to 60 minutes tack time and up to 12 hours working time for releasable installations (tack-set method)
  • Approximately 125 to 185 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel and 185 to 260 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/32 in. x 1/32 in. U-notch trowel
  • Approximately 250 to 350 sq. ft. per gallon coverage when applied with a 3/8 in. short nap roller and 90 to 120 sq. ft. per gallon coverage when applied with a 1/8 in. x 1/8 in. x 1/16 in. V-notch trowel
  • When installed over existing hard surface floors, remove finish to allow a good mechanical bond
  • Fresh adhesive is easily cleaned with warm, soapy water
  • Excellent resistance to plasticizer migration
  • Traffic ? Heavy Commercial
  • Enviro-friendly, solvent-free and LEED compliant; VOC 1 g/L, SCAQMD Rule 1168
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Non-flammable, NFPA Class A and UBC Class 1 fire resistance ratings (ASTM E84)
  • CRI Green Label Plus certified – GLP #42613
  • 15 year moisture control, 15 year direct bond, 7 year double bond limited warranty
  • Substrate porosity test must be performed and ROBERTS 1331 Multipurpose Primer must be applied if the substrate is very porous

Reviews

There are no reviews yet.

Be the first to review “Roberts 7399 Universal Plus Resilient Flooring & Carpet Adhesive (1 gal.)”

Your email address will not be published. Required fields are marked *