Raimondi RLS Vite Leveling System Caps (300/pack)

Raimondi RLS Vite Leveling System Caps (300/pack)

VITE is a Cap-and-clip lippage system without the use of any tools. Ergonomic and intuitive design to the cap make is easy to screw the lippage system onto its clip. Just as the Raimondi Lippage System, the VITE has a clip that is placed under the tile into the adhesive. The cap is screwed onto the clip and once the adhesive has set the VITE is removed by kicking or using a rubber mallet to knock it off.

Features:

• Caps are placed on-top of the threads to be tightened
• Caps spin and tightens with just two fingers
• Grip points are established on caps, spin until it reaches the tile
• Tighten caps so it levels itself between spaces which removes lippage
• Once adhesive is set simply remove caps by hitting with a rubber mallet or use the Clip Dozer
• Caps are specially designed with hollow spaces to see grout joints
• Suitable for both tile sides and intersections
• The VITE does not require any tools
• Bases are not included

How to Use Raimondi Vite Tile Leveling System:

• STEP 1: After spreading your tile adhesive, insert leveling clip underneath the tiles along the 4 sides – use traditional spacers as you normally would to square up the corners. For larger tiles, it may be necessary to “double up”, using 2 leveling spacers for each side
• STEP 2: Set the tile and beat it with a rubber mallet
• STEP 3: Spin the caps until tight. You will see tile lift removing lippage
• STEP 4: Once the tile adhesive has been allowed to set, remove the VITE system with a rubber mallet or by kicking them out with your feet. Grout can be installed once all clips have been removed