Part Number: 84-WARMTILES-CABLE-240
| 240 V CABLE KITS: |
|
WARM TILES CABLE KITS 240 VOLTS
Even in warm climates, tile and stone can feel uncomfortably cold. Warm Tiles® offers the ultimate solution by removing the chill factor with a gentle, continuous warmth. Warm Tiles Electric Floor Warming Systems may be installed directly over plywood, concrete or cement backerboard substrates. The floor warming is placed in the mortar below the tiles, simplifying the installation
The Warm Tiles Cable system provides unlimited design configurations for even the most difficult shaped room. The Warm Tiles cable allows you to install full floor warming coverage by lacing the cable on the floor wherever you require a heated area.
Two different spacing options enable these extremely flexible cables to be installed virtually anywhere. In a typical room above a heated area, simply space the cable 3”(7.61 cm) apart. For a room above an unheated area, on concrete slabs or a high heat loss room such as a solarium, alternate the spacing from 3”(7.61 cm) apart, then 1.5”(3.80 cm) apart, then 3”(7.61 cm) apart and so on. Simply snap the cable into the strapping included in your Cable Installation Kit and follow the Cable installation instructions.
Select Floor Warming kit voltage,120V or 240V to match your power supply. Areas larger than 70 sq. ft. 240V kits may be more economical.
You must use the Warm Tiles Relay Kit when connecting two or more floor warming kits that have a combined total load amperage exceeding 16 amps. Heating Cables CANNOT BE CUT and must be embedded completely in mortar beneath the floor finish.
For more information click here
|
