MONTHLY BLOW OUTS Monthly Tool Blowouts

Mapei Planiprep FF

MAPEI

Part Number: 48-PP-FF

48-PP-FF MAPEI PLANIPREP™ FF

Premium skimcoating and patching compound 10 Lb. bag

Compare with ARDEX Feather Finish - works as well or better & costs less!!

Planiprep™ FF is a feathered-finish, highly engineered, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep™ FF to patch or skimcoat minor surface defects on virtually any substrate, creating a strong, durable, high-compression-strength surface ready for almost any floor application.

Features and Benefits

• Offers a compatible bonding surface for floor-covering adhesives

• Easy to mix to a smooth consistency

• Trowels smoothly ready for a defect-free finish

• Rapid-set; ready for floor-covering installation in about 30 to 60 minutes

• Apply from featheredge to 1" (2,5 cm) in a single pass

Where to use

• Use for skimcoating unfinished, rough-textured concrete and approved wood

underlayments.

• Use for filling minor voids, holes and cracks in concrete and approved wood

underlayments.

• Interior residential (rental apartments, condominiums, homes)

• Interior commercial (office buildings, hotel rooms and hallways, restaurants,

cafeterias)

• Interior heavy commercial (hotel lobbies, convention centers, airports,

shopping malls, grocery stores, department stores)

• Interior institutional (hospitals, schools, universities, libraries, government

buildings)

• Use as an embossing leveler or patch over properly prepared vinyl sheet

goods, ceramic tile and cutback adhesive residue.

Limitations

• Do not install over any substrates containing asbestos.

• For interior installations only

• Do not apply over self-stick tile, presswood, particleboard, flakeboard or

similar types of dimensionally unstable substrates.

• Refer to the floor-covering manufacturer regarding the maximum allowable

moisture vapor emission rate (MVER).

• Use only when the substrate temperature is between 50°F and 100°F

(10°C and 38°C).

• Do not use as a final wear surface.

Suitable Substrates

• Exterior-grade plywood, Group 1, CC type (interior conditions only)

• Concrete and properly prepared cement terrazzo

• Properly prepared vinyl sheet goods (limited to one layer), ceramic tile and

cutback adhesive residue

For more information click here

Material Safety Data Sheet click here

CONTRACTORS Pallet or partial to full truck load pricing available. Shipped anywhere in the continental US direct to your warehouse or job site. Please phone (1-877-464-7424) or e-mail for information.